HOTLINE 0086-29-88606479
  Tel: 86-29-88606479   E-mail: sales@dechuang-auto.com

NEWS

About us

The purchase knowledge of Radar level meter

DATE: 2019-06-14
BROWSE TIMES: 6

Level is one of the important measurement parameters of industrial production process control, mainly the level measurement of solid materials and the liquid level measurement of liquid materials. There are many kinds of solid materials, such as blocks, granules and powders. The dielectric constant, temperature and moisture content of these materials are also different.Therefore, when selecting a level meter, it is necessary to fully consider the various characteristics of the medium and the measurement environment. Only in this way can we choose the product that best suits us. Here are some basic common sense in the choice of level meter.


1. Selection of 26G high frequency radar level meter  and guided wave radar level meter

1)DCRD1000A series sensor is a 26G high frequency radar type level measuring instrument. It is a non-contact measurement and outputs 4...20 mA analog signal. The maximum distance can be measured up to 70 meters. The antenna is further optimized, and the new fast microprocessor allows for higher-rate signal analysis, allowing the instrument to be used for very complex measurement conditions in reactors or in-situ silos. The high-frequency microwave pulse emits a narrow microwave pulse, which is transmitted downward through the antenna, and the microwave is reflected back to the surface of the measured medium, and is again received by the antenna system and transmitted to the electronic circuit portion for automatic conversion into a level signal. (Because the microwave travels very fast, the time it takes for the electromagnetic wave to reach the target and return to the receiver via reflection is instantaneous.)

The purchase knowledge of Radar level meter

2)The DCRD1000C guided wave radar is a measuring instrument based on the principle of time and travel and is a contact measurement. The radar wave is operated at the speed of light, and the running time can be converted into a level signal by electronic components. The probe emits high frequency pulses and propagates along the cable probe. When the pulse encounters the surface of the material, it is reflected back and received by the receiver in the meter, and the distance signal is converted into a level signal.

The purchase knowledge of Radar level meter


2.Measuring instrument selection for granular materials

Granular materials, such as ore, limestone, raw coal, shale, etc., are stored in the warehouse and have a repose angle (stack angle) of the material, but also have a reflective interface. According to the material repose angle (stack angle) and surface condition formed by feeding and discharging, after determining the effective range, it is recommended to use a non-contact radar level gauge (radar level gauge), that is, level meter with a horn antenna . If a contact type radar level meter is used, a large pulling force on the cable will be generated, In severe cases, the cable may be broken, which may affect the normal application of the level meter. According to the anti-information of the relevant industry users, the horn antenna has a stronger echo level and higher accuracy (±0.2~±1%F.S).


3. Meter selection for measuring powdery materials or plastic particles with low dielectric constants (eg polyethylene)

For powdered materials, it is very difficult to measure the level. The surface of the powder in Curry is very loose, and microwave reflection is quite difficult. For this reason, it is recommended to use a contact radar level meter, or a large flange non-contact radar level gauge with a horn antenna, which actually combines the cable as both the antenna and the guided wave. The microwave pulse propagates from the probe and travels along the cable. When the pulse encounters the surface of the material, it will be reflected back. The process can reach 35m, and the dielectric constant of the tested material is at least 1.6. In addition, the cable has good wear resistance and maximum tensile force, which can meet the testing requirements of various powder storage banks. At present, many cement plants and power plants have used cable-guided radar level gauges to measure the level of cement storage and fly ash storage, and achieved good results.


4.Two-wire and four-wire options

The radar level metercurrently used are mostly integrated products. They are powered by two-wire system and can be directly connected to the control system module to output 4 to 20 mA analog signals, which can save a lot of cables. The four-wire technology has a higher signal-to-noise ratio than the two-wire technology, so it has a large measurement range and can be used in harsh conditions. Therefore, in the harsh and complicated working conditions where the two-wire instrument cannot meet the requirements, four-wire instruments can be considered.


5.120GHz FMCW radar level meter.

the 120GHz FMCW ultra-high frequency radar level meter that is fully compatible with all 26GHz/80 GHz radar operating conditions,  and performs better than 26/80 GHz.Mainly for the complex and difficult working conditions of various industries:various reactors, mixing, steam, crystallization, smoke, condensation, strong dust, small tank measurement.


Xi’an Dechuang Electrical Technology Co., Ltd

www.dechuang-auto.com


Share to
RELATED NEWS / News More
  • Number of clicks: 1
    2019 - 11 - 07
    Radar level transmitter is advanced level measuring instrument, whose maximum measuring range can be up to 70 meters. Whose Antenna have been further optimization, the new rapid microprocessor can undertake higher rate of signal analysis and processing, so that this transmitter can be used in the process of the solid material, containers or strong dust easily crystallized, condensation.1.radar level transmitter applied in measuring the level of solid particle.In cem...
  • Number of clicks: 0
    2019 - 10 - 28
    Our company's high-frequency radar level meter has been successfully applied to Xinjiang Superenergy Chemical crude oil/asphalt project.Xinjiang Superenergy Chemical Co., Ltd. belongs to petrochemical projects,the planned production lines include: raw material oil pretreatment unit, natural gas hydrogen production unit, and high pressure hydrogenation unit. After completion, the annual output of road asphalt is 1 million t/a, industrial white oil is 300,000 t/a, rubber filled oil is 384,000 t/a, and solvent oil is 115,000 t/a.The high-frequency radar level transmitter of Xi'an Dechuang Electric Technology Co., Ltd. has been successfully applied in this project to monitor the continuous level change of asphalt storage tank in real time, which provides more convenient service for intelligent...
  • Number of clicks: 4
    2019 - 10 - 14
    There are many corrosive liquid used in various chemical industries, then the corrosive liquid level measuring instrument are required commonly, For radar type level sensor, we have below 3 types of anti-corrosion:1. DCRD1000A1, PTFE corrosive proof radar level sensor2. DCRD1000A2, PFA corrosive proof radar level sensor3. DCRD1000C5, FEP corrosive proof radar level sensorXi’an Dechuang Electrical Technology Co., Ltd
  • Number of clicks: 3
    2019 - 08 - 21
    Water conservancy radar liquid level gauge of the advantage of using, operation personnel in the use of radar level timing to able to master the relevant skills, in use process, need to pay attention to the related matters, let radar level meter to achieve good operation. Operating personnel in the use of radar liquid level time, to pay attention to these issues:1, Attention should be paid to the measurement range of the radar level meter, from the beam hit the bottom of the tank that begins to calculate, if in special circumstances, shape of the bottom of the tank is a concave shape or a conical, on behalf of the measurement work can not be carried out.2, The use of radar level meter in the process of measurement, to pay attention to the measurement of the value of the fluctuati...
  • Number of clicks: 4
    2019 - 08 - 21
    It is known that intelligent radar level transmitter functions according to echo distance measurement principle, but few people know how radar level transmitter measures substance distance by electron wave. Where will radar level transmitter be used in life? Our R&D team will give you answers on its working principle in the following:Radar level transmitter emits the microwave transmitted by antenna while signal processor compares the emission signal with received signal, the measured distance is calculated. Because microwave occurs attenuation and noisy reflection, the key measurement is received and reflected echo and identified the effective echo. :High frequency radar level transmitter is converted into level signal based on specific time stretch by electronic compon...
Email:sales@dechuang-auto.com
Adress:
Tel:86-29 88606479
Fax: 86-29 88385903
B203, Gazelle Valley, No.69 Jinye Rd, Hi-tech zone, Xi'an, Shaanxi Province, P.R.China. 710077
Copyright ©2018 - 2019 Dechuang Electrical Technology Co., Ltd SITEMAP
Rhino Cloud Provides Enterprise Cloud Services
犀牛云提供云计算服务