LOCATION： HOME → NEWS → COMPANY NEWS

NEWS

About us

120ghz FMCW radar level meter with high temperature resistance used in blue carbon material

DATE： 2019-08-05

BROWSE TIMES: 6

The 120ghz FMCW radar level meter with high temperature resistance has been successfully applied in blue carbon material level detection

There is open fire in the measuring environment, and the temperature is high. We chose 120ghz FM radar object level meter with high temperature resistance and the measuring effect is good.

As a leading manufacturer of the radar level transmitter, continuous level measuring for solid and liquid medium, products as follows:

1. 6.8GHz contact Guided wave radar radar level meter

2. 26GHz non-contact radar level meter

3. 120GHz FMCW radar level meter.

PRVE：DCRD1000B 120ghz fmcw radar level measurNEXT：120GHz FMCW radar level Transmitter succ

Share to

BACK TO LIST

RELATED NEWS / News More

With the filial piety makes the winter more warmly

Number of clicks: 1

2020 - 01 - 03

With the filial piety makes the winter more warmly On this special day, the 80th birthday of our colleague's father and father was ushered in, and all the family members of Xi'an Dechuang wished the elderly a good health and happiness.Hope that more caring for the elderly and often take your children back home when you are off day, try your best to accompany your parents. Any requirements of radar level measurement, please contact us and send your inquiry as soon as possible.
On the last day of 2019, let's review the radar level gauges used to measure various cement tanks

Number of clicks: 4

2019 - 12 - 31

On the last day of 2019, let's review the radar level gauges used to measure various cement silosThe most popularly model of DCRD1000A3 Radar level transmitter in cement project.Main features of 26ghz radar level sensor:·Small antenna size, easy to install; non-contact radar, no wear, no pollution.·Almost free from corrosion, foam impact; hardly affected by the change of the temperature, pressure and water vapor in the atmosphere.·Severe dust environment is not likely to affect the work of the high-frequency level meter.·Shorter wavelength can achieve better reflection for the inclined solid surface.·The small field angle and energy concentration, enhanced echo capabilities, and beneficial to avoid interference.·Minimized measuring blind spot can gain be...
Busy production of radar level transmitter in Dechuang company 2019.12

Number of clicks: 3

2019 - 12 - 13

Busy production of radar level transmitter in Dechuang company 2019.12As the most traditional festival in China -------Chinese Spring Festival is from Jan 24 to Jan 30 in 2020, all the production become much more busier from earlier of December 2019... ( normally for Spring festival, the holiday will last almost one month, which 10-15day on before and after the official holiday ) Welcome, 2020!Come on, Dechuang!
The exciting order of radar level transmitter in Dechuang

Number of clicks: 10

2019 - 12 - 05

Hello, December!Just the beginning of the month, Our company ushered in gratifying results! WOW! One order, signal model of radar level transmitter, the total amount exceeding RMB2,000,000! TWO MILLION!Proud of outstanding Dechuang employees!The company celebrated the big order, and sent a health pot to each employee in the cold winter, so that everyone in Dechuang family feels more warmth. Dechuang people will work harder to provide customers with better products and better services.Let us work together to meet a better 2020!
Bulk solid silos radar level gauge model selection of Universal joint and air purge set

Number of clicks: 18

2019 - 11 - 27

Air purge+Nuzzle , Universal joint:The necessary adjunct when measuring the level of bulk solid in silos bins and tanks.When radar level gauge measure the level of solid medium, such as grains, cement powders, solid particles, the solid material will form a stockpile or hopper in the silo when feeding or undloading. Then the antenna of the radar level transmitter need to perpendicularly alignment to the medium surface, if the material is uneven, and the heap angle is large then the universal joint flange is needed to adjust the horn angle to aim the charge level.(Due to the inclination of the solid surface it will cause the problem of echo decay or even the signal loss.) &#...