HOTLINE 0086-29-88606479
  Tel: 86-29-88606479   E-mail: sales@dechuang-auto.com

NEWS

About us

How to choose the model correctly for the guided wave radar level transmitter

DATE: 2019-04-19
BROWSE TIMES: 6

Guided wave radar level transmitter selection considerations


1.Selecting the guided wave radar level gauge must confirm the viscosity of the measuring medium. If the measuring medium is very viscous, it is not suitable for the contact type measuring method of the guided wave cable rod. The hanging material will affect the transmission of the signal, and the reception will generate a false signal.

   

2. If the measured medium is corrosive, it is necessary to use a guided wave cable sleeve of PTFE or a rod set of PTFE.


3. the definition of the range, the range generally we even install the flange face down to the vertical distance from the bottom of the tank, this parameter must be accurate, the lowest end of the cable probe from the bottom of the tank at least 30mm of the sub space, to ensure that the probe does not touch the bottom of the metal tank to generate interference signals. The cable can be kept longer, so that it can be cut if long. but if it is short, it needs to be re-customized. We must confirm the length of the cable when determining the parameters, so as to avoid the normal measurement at the site.


4. Select the guided wave radar level gauge to confirm whether there is a position of the stirring fan blade in the tank.  If the fan blade is close to the pipe wall, then the GWR level transmitter is not suitable for use , or by adding a bypass pipe to measure it,Or the pole should be at least 300mm from the pipe wall.

   

5. If the measured dielectric constant of the liquid medium is very low, you can refer to the radar level gauge with the guided double cable, the effect will be better.


6. There are two ways to fix the end of the probe if it needs to be fixed: insulated and non-insulated.

(1) Insulation fixing refers to the way of insulation fixing when the measured dielectric constant is low and fixed at the bottom of the metal can.

(2) Non-insulating fixing refers to the non-absolute fixing method used when the dielectric constant of the measured medium is high and the tank is made of metal, the dielectric constant is very low, or the material with the dielectric constant of the measured medium is very close.


Share to
RELATED NEWS / News More
  • Number of clicks: 0
    2020 - 04 - 07
    120GHz FMCW radar liquid level gauge successfully applied to liquid level measurement in chemical reaction pot. There are many types of equipment in the chemical industry, huge quantities, and complicated controls. Highly corrosive acids, bases, some flammable and explosive chemicals are generally used in its raw materials. Therefore, whether it is a storage tank, or the reaction equipment includes a reaction kettle, pot, and tower heat ex-changer , Heating furnace, etc., the safety requirements of the equipment are very high. As a liquid level measuring instrument installed on a storage tank or a reaction kettle, the liquid level gauge also faces technical performance challenges in the face of the complex structure and severe working conditions of equipment in the chemical ...
  • Number of clicks: 1
    2020 - 03 - 19
    Integrated radar water level meter is 26G high frequency radar liquid level measuring equipment,the maximum distance can be measured up to 70 meters. The antenna can be further optimized, the new type of fast microprocessors can be analyzed at a higher rate, allowing the instrument can be used for very complex measurement conditions. With DC12/24V lithium battery+Solar power, and transmit the data by GPRS, RS485 or 4-20mA.When choosing GPRS protocol,using low cost and only need a SIM card, it can be applied to water level measured in all industries.Feature: with DC12/24V lithium battery+Solar power, GPRS Protocol, high precision; strong anti-interference,hardly affected by the temperature, humidity and wind; Easy to install and debug; lower power consumption.Applica...
  • Number of clicks: 3
    2020 - 03 - 16
    Radar level instruments measure the distance from the transmitter/sensor (located at some high point)to the surface of a process material located further below in much the same way as ultrasonic level sensor, by measuring the time-of -flight of a traveling wave and then determine the level of the process material. They are regarded as continuous level measurement devices because they continue to measure level even as the level of the liquid in the vessel changes. The fundamental difference between a radar level instrument and an ultrasonic level instruments is the type of wave used. Radar level instruments use radio waves instead of sound waves used in ultrasonic instruments. Radio waves are electromagnetic in nature (comprised of alternating electric and magnetic fields), with very h...
  • Number of clicks: 6
    2020 - 03 - 13
    NOT FAMOUS BRAND, BUT STRONG STRENGTH!-----------------------120GHz FMCW Radar level meter/transmitter DCRD1000B  The main advantages of 120GHz fmcw Radar level measurement: 1. Not be affected by atmospheric precipitation;                                        2. The ambient temperature is -60°C to 1000 °C       3. Being Installed on the outside of tank;4. The antenna inside of the level transmitter is protected by fluoroplastic lens heating;5. The measuring radiation is narrow, easy to install and measurement sensibility;6. The accuracy of the level measurement can't be limited by the temperature of tank;7. Evaporation,foaming and dust...
  • Number of clicks: 2
    2020 - 01 - 03
    With the filial piety makes the winter more warmly On this special day, the 80th birthday of our colleague's father and father was ushered in, and all the family members of Xi'an Dechuang wished the elderly a good health and happiness.Hope that more caring for the elderly and often take your children back home when you are off day, try your best to accompany your parents. Any requirements of radar level measurement, please contact us and send your inquiry as soon as possible.
Email:sales@dechuang-auto.com
Adress:
Tel:86-29 88606479
Fax: 86-29 88385903
B203, Gazelle Valley, No.69 Jinye Rd, Hi-tech zone, Xi'an, Shaanxi Province, P.R.China. 710077
Copyright ©2018 - 2019 Dechuang Electrical Technology Co., Ltd SITEMAP
Rhino Cloud Provides Enterprise Cloud Services
犀牛云提供云计算服务