HOTLINE 0086-29-88606479
  Tel: 86-29-88606479   E-mail: sales@dechuang-auto.com

NEWS

About us

the Installation Position Selection Of Radar Level Sensor 2/2

DATE: 2019-06-05
BROWSE TIMES: 4

the Installation Position Selection Of Radar Level Sensor  2/2

Connect to the previous article....

 

The radar level Sensor should be installed to avoid contact between the sensor and the tank wall and should be kept at a certain distance from the tank wall. Because the radar level meter is measured by transmitting high-frequency microwave pulses along the detection component, the dielectric constant changes when these pulse waves encounter the measured medium, causing the emission. Therefore, if the installed radar level sensor is too close to the tank wall, the dielectric constant of the tank wall may be obtained, which directly leads to the inaccuracy of the measured parameters.

 

Correct installation method of radar level Sensor:

 

5. The Radar level sensor can not be installed in the middle of the arch and round tank top. When the radar sensor is installed in the middle of the arched and rounded tank top, not only the indirect echo but also the multiple echoes will be received. The multiple echoes may be larger than the threshold of the true echo signal, because the top can be concentrated by multiple echoes.

As Shown: ① right ② wrong

 the Installation Position Selection Of Radar Level Sensor  2/2

6. When the tank obstacles affect the measurement, the baffle-board must be installed for proper measurement.

As Shown: ① right ② wrong

the Installation Position Selection Of Radar Level Sensor  2/2 

7. The pipe joint height requirements, it must ensure that the antenna extends into the tank for at least 10mm

  the Installation Position Selection Of Radar Level Sensor  2/2

Xi’an Dechuang Electrical Technology Co., Ltd

Website:  www.dechuang-auto.com


Share to
RELATED NEWS / News More
  • Number of clicks: 6
    2019 - 07 - 25
    Our 26GHz radar level gauge has been successfully applied to the tank oil level monitoring process of gasoline and diesel in a Gas-to-Gas Co., Ltd.26GHz radar level gauge, non-contact, equipped with universal flange or dust-proof purging equipment optionally, this series of products has been serving customers in various industries for many years, the measurement is stable and accurate. Our company selects the correct type according to the customer's actual operating conditions, and the customer is very satisfied with the use.                                                       Xi’an Dechuang Electrical Technology Co., Ltd
  • Number of clicks: 6
    2019 - 07 - 05
    Today, Xi'an DeChuang Radar Level Sensor DCRD1000A3 has been running well since the “China Yinan Project of an Energy Group Company” was put into operation. This project has achieved zero service, zero failure, zero maintenance, the company's products are well received by customers, and the cooperation between the two parties is very enjoyable.This DCRD1000A3 Radar level sensor  is used to measure the level of Coal powder, with strong dust.                                     The successful cooperation with this energy group has once again confirmed the quality assurance of our products. We believe that through the unremitting efforts and pursuit of all employees, we will be able to ach...
  • Number of clicks: 4
    2019 - 06 - 19
    Xi'an Dechuang participated in the 2nd China Petrochemical Instrumentation Automation Technology Localization Promotion SeminarIn order to help petrochemical enterprises promote safe production, energy saving, and sustainable development, help China's national instrument automation industry become stronger and bigger, The second China Petrochemical Instrumentation Automation Technology Localization Promotion Seminar was held in Hangzhou on June 19th. the radar level sensor and the tank side indicator produced by Xi'an DeChuang participated in the conference, and received the attention of the participating instrument specialists. Xi’an Dechuang Electrical Technology Co., Ltdwww.dechuang-auto.com
  • Number of clicks: 4
    2019 - 06 - 17
    The 26GHz high-frequency intelligent radar level transmitter is currently the mainstream product for measuring solid level in the world. The maximum distance can be measured up to 70 meters, the antenna is further optimized, and the new fast microprocessor can perform higher-rate signal analysis and processing. The meter can be used for some complicated measurement conditions such as reactors and solid silos. The 26G high-frequency radar level transmitter (DcRD1000A series) independently developed by Xi'an Dechuang Electrical Technology Co., Ltd has the following performance characteristics:1.The high-frequency radar level transmitter (mainly 26GH and 24GHz) has the advantages of high energy and small beam angle. For example, the beam angle of the φ95 horn antenna is 8&...
  • Number of clicks: 4
    2019 - 06 - 05
    the Installation Position Selection Of Radar Level Sensor  2/2Connect to the previous article.... The radar level Sensor should be installed to avoid contact between the sensor and the tank wall and should be kept at a certain distance from the tank wall. Because the radar level meter is measured by transmitting high-frequency microwave pulses along the detection component, the dielectric constant changes when these pulse waves encounter the measured medium, causing the emission. Therefore, if the installed radar level sensor is too close to the tank wall, the dielectric constant of the tank wall may be obtained, which directly leads to the inaccuracy of the measured parameters. Correct installation method of radar level Sensor: 5. The Rada...
Email:sales@dechuang-auto.com
Adress:
Tel:86-29 88606479
Fax: 86-29 88385903
B203, Gazelle Valley, No.69 Jinye Rd, Hi-tech zone, Xi'an, Shaanxi Province, P.R.China. 710077
Copyright ©2018 - 2019 Dechuang Electrical Technology Co., Ltd SITEMAP
Rhino Cloud Provides Enterprise Cloud Services
犀牛云提供云计算服务